MO.tool
Electrical · MO.tool

Lightning ProtectionSOON

Lightning protection to IEC 62305: risk assessment and class, mesh and rods on the roof you pick, down conductors, earthing and the calculation sheet.

Available soon · video and upload in preparationStandards & formulas
INTERACTIVE EXAMPLE

Protect the roof.

Pick a protection class and watch the mesh and the down-conductor spacing follow.

ELECTRICAL DESIGNSample project

Press play to watch it work.

DEMO
MESH 5 × 5 mLPS · CLASS IMesh5 × 5 mRolling sphere20 mDown conductors10 mEarth pits9 shownRisk R1 below RT · IEC 62305
Class I LPS · mesh 5 m, rods at the corners, down conductors and earth pits drawn

Explore with sample geometry here. Run the tool on your project inside Revit.

WATCH THE WALKTHROUGH

Lightning Protection · video explanation

IN REVIT

How to use it.

  1. 01

    Run the risk assessment (IEC 62305-2) for the class.

  2. 02

    Pick the roof: mesh, rods, down conductors and earth pits are laid.

  3. 03

    Size the earthing and print the calculation sheet.

Explore electrical
MORE IN ELECTRICAL
Power a CircuitElectricalSwitch LabelsElectricalTemplate DesignerElectricalVoltage DropElectrical

Give your feedback about Lightning Protection

Tell us what you think about Lightning Protection, or describe a problem you ran into. Only the MO.tool owner reads it, and we will reply by email when it helps.